Serving Milwaukee & Vicinity: Glendale, Germantown, Menomonee Falls, Whitefish Bay, Shorewood, Brookfield, Waukesha,
New Berlin, West Allis, Wauwatosa, Franklin, Cudahy, Oak Creek, Greenfield, Muskego, St. Francis, Hales Corners, South Milwaukee
Toilet Repair leaking toilet, toilet leak, toilet repair 0
We get many calls each week from people complaining about having a leaking toilet but they’re not quite sure what part of the toilet the leak is coming from, or what’s causing the leak.
We found this video, courtesy of DIY On The House, that explains all of the possible places a toilet can leak. Enjoy…
Toilet Repair leaking toilet, toilet leak, toilet tank leak
Leaking toilet tanks are responsible for the loss of tens of thousands of gallons of water per year. That isn’t good for the environment and it isn’t good for your wallet either. Toilet tanks aren’t infallible; after you’ve had them for a few years, it is not unusual for a leak to start. As a result, it is important to take a look at your plumbing system on a regular basis to make sure there aren’t any issues.
The best way to prevent a problem is to periodically look over your toilet tank and make sure there are no leaks. Most toilets and tanks are very similar. There are two valves in the tank. One is a flush. The other collects the water until it is ready to be flushed. The ball-cock is a refill valve that is often found in the toilet tank. If the flush valve doesn’t seat right, there is an issue with your tank and it is time to call in a professional.
When a leak springs up, tank water gets into the bowl. If left unchecked, the refill tank continues to fill up, over and over. That means there is a lot of water that gets wasted. It is also possible for the refill valve to leak as well. Water is constantly moving into the bowl. That should alert you to the fact that there is a major problem.
Need a plumber to fix your toilet? Call us today!
Figuring out if the flush is leaking is not hard. Once you determine that there is a leak, stop the water supply so that the toilet tank is not getting any water. There is a valve that does this. One thing you can do is to note the water level once you have closed the water. Wait half an hour and then look to see if there is any difference. Obviously, if there is not as much water as before, there is a leak that needs to be addressed. However, if the water is at the same level, there is no issue with the flush valve. The problem is the refill valve instead. The fix for that is pretty simple; just tighten it up a little or adjust a few things. You also need to check to see that there is ample water for flushing but nothing else. You don’t want the water to move over the overflow pipe.
There is a water level mark in every flush tank. You do not want the water level to be too low. The water is necessary for there to be a sealing trap. Occasionally, the float may come in contact with other parts of the toilet. To stop that from happening, just separate the float and the leak should stop.
You need to make sure there isn’t any water logging, either. Fix this issue by taking the float out and washing it off. If logging continues to be a problem, get a new part. If you are also struggling with the flush valve, and nothing you do is making a difference, put in a new flush ball. Just the actuating mechanism can be switched up as well, so you may not have to replace the entire part. Before you buy something new, though, check to make sure there isn’t anything you can do that will fix the problem.
Toilet Repair leaking toilet, toilet leak, toilet leak repair
Your plumbing system is one of the most important systems in your home. If you do not keep it properly maintained a number of issues can arise and cause you problems. One of the most annoying issues of a plumbing system is a leaking toilet.
A leak increases your water consumption thus increasing your water bill. Some typical sounds associated with a silent leak are sounds coming from the toilet when it is not being used, needing to keep the handle pressed down to completely empty the tank, water that runs down the sides of a toilet when it is not being flushed and runs even when the handle has not been pressed down. These can point towards a leak; however, you may have a leak even if you cannot hear it or see it. This type of leak is called a silent toilet leak. In order to diagnose this type of leak, you will need to perform one of the following tests.
The Dye Test
This test is very popular among homeowners. To perform this test you will need to purchase a dye kit from your local plumbing supplier or your water company. The dye supplied is typically red in color. Once the dye has been purchased you are ready to begin the leak test. Remove the water tank cover and any product that colors the water, such as a toilet cleaning tablet. In order to do this test you will need completely clear water. Next, place enough dye in the tank to create a deep red color. Wait thirty minutes and verify if the water changed color. If the water has turned even a light pinkish color, you have a silent leak.
Shut Off the Water to the Toilet
Another way to determine if you have a silent leak is to turn off the water to the toilet at bedtime. In the morning, check the water level in the tank. If there is less water in the tank than there was when you went to bed, you have a silent toilet leak.
Toilet leaks can cause you to waste a lot of water. In fact, some homeowners lose as much as 500 gallons of water each day due to a leaky toilet. This not only increases your water bill but also is not good for the environment. There are several reasons for a leaky toilet, including a worn out ball or flapper, a crack or hole in the overflow tube, the gasket under the flush valve is damaged or a new washer or seat is needed for the ballcock.
Call our 24 hour emergency plumbing services if you need help with leaking toilet repair.
Because silent leaks cannot be heard or seen many homeowners do not know they have a leak until they get a huge water bill or experience a serious plumbing issue. One of the most important maintenance tests that a homeowner can perform is a silent leak test using one of the methods described above. Performing this test will ensure that your toilet is running properly, improve your water conservation efforts and keep your water bills low.
Call our 24 hour emergency plumbing services if you need help with leaking toilet repair.